diff options
Diffstat (limited to 'config.toml')
| -rw-r--r-- | config.toml | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/config.toml b/config.toml deleted file mode 100644 index 1f05b75..0000000 --- a/config.toml +++ /dev/null @@ -1,105 +0,0 @@ -# producer settings — CLI flags always override anything set here. - -# "audiobook" = close-narration voice chain, RMS -20 dB, true peak <= -3 dB, 44.1 kHz -# "podcast" = broadcast chain, -16 LUFS, true peak <= -1.5 dBTP, 48 kHz, brighter EQ -# "radio" = deep, warm broadcast voice: +3 dB low shelf @ 100 Hz, tighter mud cut, -# heavy compression, tape saturation; -16 LUFS, 48 kHz -profile = "radio" - -# Output container/codec: wav | flac | mp3 (default: wav) -# format = "wav" - -# Bit depth: 16 | 24 | 32 (default: 32) -# bit_depth = 32 - -# Output sample rate in Hz (default: 44100 audiobook / 48000 podcast) -# sample_rate = 44100 - -# Compute device: auto (CUDA if present) | cuda | cpu -# device = "auto" - -# GPU engine processing: engines receive the whole file by default so models -# run one warm pass with no seam artifacts and a single model cold-start. -# chunk > 0 forces chunked streaming in seconds (very long files / low VRAM); -# whole-file runs fall back to chunks automatically if they run out of memory. -# engine_chunk = 0.0 # 0 = whole file (default) -# engine_overlap = 0.5 # crossfade between chunks in seconds - -# Loudness target and true-peak ceiling in dB. -# Without these, each profile uses RMS -20 / ceiling -3 (audiobook) or -16 LUFS / -1.5 (podcast). -# target = -20.0 -# ceiling = -3.0 - -# How much of the denoised/enhanced signal to blend in (0-1). 0 disables the stage. -# denoise_strength = 1.0 -# enhance_strength = 1.0 - -# Denoiser: "dfn3" (DeepFilterNet3, default, fast, 48 kHz full-band) -# "zipenhancer" (ICASSP 2025 SOTA, 16 kHz native, bandwidth restored) -# "spectral" (pure-DSP dd-wiener with a file-global noise profile, -# no downloads, no wobble) -# "off" (pure DSP, no heavy downloads) -# Heavy deps + model weights are installed lazily on first use. -[denoise] -engine = "dfn3" -# 0.9 flattens residual denoiser gain wobble (volume pumping); the small dry -# blend trades a whisper of noise back for level stability. 1.0 = max attack. -strength = 0.9 -# pf = false # DeepFilterNet post filter: extra noise reduction, opt-in — -# # may eat soft speech on clean recordings (off by default) - -# Speech enhancement: "off" (default), "mossformer2" (studio restoration), -# "resemble" (generative, opt-in isolated venv, may alter timbre) -[enhance] -engine = "off" - -# Per-profile voice DSP strengths, 0-1 each (CLI flags --hpf, --mud, ... always win). -# 0 disables a stage entirely; every stage is optional. -# hpf = strength of the high-pass (0 turns it off; corner set via hpf_hz) -# mud = cut around 300 Hz (boxy mud) -# warmth = low-shelf lift (position set per profile: 150 Hz audiobook/podcast, 100 Hz radio) -# soothe = dynamic EQ that ducks boxy (200-450 Hz) and harsh (2.5-6 kHz) resonances -# only while they stick out — unlike static EQ, "off" when the voice is clean -# compress = serial 2:1 + 3:1 compression -# tape = asymmetric soft-clip saturation — analog/even-harmonic radio warmth -# deess = de-esser active around 5.5-8 kHz -# presence = boost around 3 kHz -# air = high shelf from 9-10 kHz -# breath = downward expander depth used to duck breaths and residual hiss -# in sentence gaps (0 disables; up to ~24 dB of ducking at 1.0) - -[audiobook] -mud = 0.8 -warmth = 0.8 -soothe = 0.3 -compress = 0.8 -tape = 0.0 -deess = 0.6 -presence = 0.8 -air = 0.6 -breath = 0.35 -# hpf_hz = 80.0 # high-pass corner frequency (audiobook default 80) - -[podcast] -mud = 0.6 -warmth = 0.7 -soothe = 0.5 -compress = 0.9 -tape = 0.2 -deess = 0.7 -presence = 1.0 -air = 0.8 -breath = 0.2 -# hpf_hz = 80.0 # high-pass corner frequency (podcast default 80) - -[radio] -mud = 0.9 -warmth = 1.0 -soothe = 0.7 -compress = 1.0 -tape = 0.55 -deess = 0.5 -presence = 0.7 -air = 0.5 -breath = 0.4 -# hpf_hz = 70.0 # high-pass corner frequency (radio default 70) |